Tag: Pressure washing princeton nj – Fundamentals

Pressure washing princeton nj – Fundamentals

When you’re looking for a fast and inexpensive way to clean the exterior surface around your home, there are almost no alternative more effective than a perfect pressure wash. These are some tips which can be very helpful while pressure washing your home.
Pressure Washing Tips
Water and electricity are not a great combination. While pressure washing, it’s natural to get wet and it also leaves you open to the risk of receiving an electric shock from electric outlets or wires. Make sure that there is no power line above your head before you place the extending ladders. Take note of the position of the electrical service cable, the electric meter and the exterior outlets and lights. This will help you to stay out of blasting through these electrical deathtraps!
The ladder should be placed firmly at a proper angle. This proper angle could be 75 to 78 degrees. For measuring the correct angle, place your toe at the base of the ladder. Keeping your arms straight out, check if you can rest your hands on the fifth rung. While pressure washing, the most dangerous part is to work with both of your hands and standing at an elevation on the ladder. It’s always suggested to hire a professional for any high scale pressure washing project. If you want to do it yourself, don’t rush the work and take your time to be steady on the ladder. Get the facts about  Pressure washing princeton nj

Use a pressure wash nozzle which has a wider fan pattern before fixing a nozzle with a narrow fan pattern. The fan pattern for yellow nozzle spray is 15 degrees, the green one is 25 degrees, the white one is 40 degrees and the red nozzle spray, which is not usually required unless you need to strip of solidified mud, has a fan pattern of 0 degrees. The nozzle should be continuously moved and held at the recommended distance from the surface of exposure. Most importantly, make sure that you don’t blast the water in the upward direction at a very steep angle. It’s also preferred not to blast directly in to the corners, into the dryer or attic vents and under the window edges.